# Big A Miner Thing configuration
# /etc/bamt/bamt.conf
#
# When done editing, restart mining to make changes here take effect
# If you're just setting up BAMT, be sure to edit pools as well.
#
# As of 0.5, many less common options have been removed from this
# default config to make it easier on the noobs.
#
# You will find a complete example with all options described
# at /opt/bamt/examples/bamt.conf
#
# Note: This is a YAML file. Indentation is significant.
#
# If you break things badly, a backup of this file in it's original
# form can be found at /opt/bamt/examples/bamt.conf.simple
#
---
settings:
# miner_id is used to set hostname and identify this rig to munin and
# other processes
# IMPORTANT! miner_id must be a valid hostname: all lower case, no weird
# characters, underscores, periods, or spaces. Dash and numbers are ok.
miner_id: 4radeona
# loc is any additional string you wish to use to identify or group this rig
miner_loc: sobica
# should we monitor the cards? 1 = yes, 0 = no
do_monitor: 1
# if monitoring, how do we send email alerts?
# these are required..
# smtp_host: smtp.gmail.com
# smtp_to: [email protected]
# these are optional..
# smtp_from: somefrom@address
# smtp_subject: I wanted a custom subject in my alerts...
# smtp_port: 587
# smtp_auth_user: user@where
# smtp_auth_pass: secret
# smtp_tls: 1
# smtp_ssl: 1
# GPU Configurtation
# You'll need one gpuX: section per GPU installed. Not sure what's installed,
# or the order? Open a root shell and type: aticonfig --list-adapters
#
# You can delete gpu sections if you don't have that many cards.. or add more
# if you find a way to run them
gpu0:
# remove disabled: or set it to 0 to actually use this card..
disabled: 0
# overclocking.. all are optional
# optional command to execute prior to overclocking
# any valid command (or the path to a script) is fine
# pre_oc_cmd:
# (core/mem)_X = the value to set for this profile (0-2)
# Profile 2 is used while mining, but setting values
# in profile 2 that are *lower* than the values in the other
# profiles is not allowed on some GPUs, so you have to adjust
# the other profiles as well.
# For instance, to get 300Mhz mem clock on my 5830s, I have
# to set all 3 profiles to 300.
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
# recommend to set and forget fan, preferably at 100
fan_speed: 100
# optional command to execute after overclocking
# post_oc_cmd:
gpu1:
# remove disabled: or set it to 0 to actually use this card..
disabled: 0
# overclocking.. all are optional
# optional command to execute prior to overclocking
# any valid command (or the path to a script) is fine
# pre_oc_cmd:
# (core/mem)_X = the value to set for this profile (0-2)
# Profile 2 is used while mining, but setting values
# in profile 2 that are *lower* than the values in the other
# profiles is not allowed on some GPUs, so you have to adjust
# the other profiles as well.
# For instance, to get 300Mhz mem clock on my 5830s, I have
# to set all 3 profiles to 300.
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
# recommend to set and forget fan, preferably at 100
fan_speed: 100
# optional command to execute after overclocking
# post_oc_cmd:
gpu2:
# remove disabled: or set it to 0 to actually use this card..
disabled: 0
# overclocking.. all are optional
# optional command to execute prior to overclocking
# any valid command (or the path to a script) is fine
# pre_oc_cmd:
# (core/mem)_X = the value to set for this profile (0-2)
# Profile 2 is used while mining, but setting values
# in profile 2 that are *lower* than the values in the other
# profiles is not allowed on some GPUs, so you have to adjust
# the other profiles as well.
# For instance, to get 300Mhz mem clock on my 5830s, I have
# to set all 3 profiles to 300.
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
# recommend to set and forget fan, preferably at 100
fan_speed: 100
# optional command to execute after overclocking
# post_oc_cmd:
gpu3:
# remove disabled: or set it to 0 to actually use this card..
disabled: 0
# overclocking.. all are optional
# optional command to execute prior to overclocking
# any valid command (or the path to a script) is fine
# pre_oc_cmd:
# (core/mem)_X = the value to set for this profile (0-2)
# Profile 2 is used while mining, but setting values
# in profile 2 that are *lower* than the values in the other
# profiles is not allowed on some GPUs, so you have to adjust
# the other profiles as well.
# For instance, to get 300Mhz mem clock on my 5830s, I have
# to set all 3 profiles to 300.
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
# recommend to set and forget fan, preferably at 100
fan_speed: 100
# optional command to execute after overclocking
# post_oc_cmd:
# Phoenix mining setup (see full example for how to use cgminer instead)
# We strongly recommend you use phoenix at, least until you are familiar
# with BAMT
# kernel to use.. one of: phatk phatk2 poclbm
# if in doubt, use phatk2
kernel: phatk2
# phoenix style kernel params. *do not* include DEVICE=x, otherwise
# exactly same as any phoenix setup.
# if in doubt: BFI_INT VECTORS AGGRESSION=11
# (though 9 on GPU0 often makes using the GUI more pleasant)
kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=9
# Pool file
# IMPORTANT: pool_file must contain a list of pool URLs.. one at least, more if
# you like. You can share the same file for all GPUs, or have one for each.
# Miner will start with first URL in file, however if no shares are accepted
# for any reason in (pool_timeout) seconds, the miner will move to next URL
# in the file. Wraps around to first URL when last one fails.
# You can also set pool specific values, see the example pools file.
# if in doubt: /etc/bamt/pools
pool_file: /etc/bamt/pools
# max time to allow phoenix to run without finding a share..
# exceed this and we kill phoenix, start a new instance with
# next line in pools file
pool_timeout: 180
# monitoring limits, used by email alerts and gpumon
# an alert is generated if the current value goes below a 'lo'
# or above a 'hi'.
# GPU temp sensor reading (in C)
monitor_temp_lo: 45
monitor_temp_hi: 80
# GPU load (in %)
monitor_load_lo: 80
# average hashrate (in mh/s)
monitor_hash_lo: 125
# fam rpm (in rpm)
monitor_fan_lo: 2000
# effective reject rate (in % of total)
monitor_reject_hi: 2
# OK.. hopefully you get the idea. Stubs for additional GPUs below.
# There are many additional paramters to help you deal with various
# scenarios, see /opt/bamt/examples and the docs (if we write some)
gpu1:
disabled: 1
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 1060
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 1120
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
fan_speed: 100
kernel: phatk2
kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11
pool_file: /etc/bamt/pools
pool_timeout: 180
monitor_temp_lo: 45
monitor_temp_hi: 80
monitor_load_lo: 80
monitor_hash_lo: 125
monitor_fan_lo: 2000
monitor_reject_hi: 1
gpu2:
disabled: 1
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
fan_speed: 100
kernel: phatk2
kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11
pool_file: /etc/bamt/pools
pool_timeout: 180
monitor_temp_lo: 45
monitor_temp_hi: 80
monitor_load_lo: 80
monitor_hash_lo: 125
monitor_fan_lo: 2000
monitor_reject_hi: 1
gpu3:
disabled: 1
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
fan_speed: 100
kernel: phatk2
kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11
pool_file: /etc/bamt/pools
pool_timeout: 180
monitor_temp_lo: 45
monitor_temp_hi: 80
monitor_load_lo: 80
monitor_hash_lo: 125
monitor_fan_lo: 2000
monitor_reject_hi: 1
gpu4:
disabled: 1
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
fan_speed: 100
kernel: phatk2
kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11
pool_file: /etc/bamt/pools
pool_timeout: 180
monitor_temp_lo: 45
monitor_temp_hi: 80
monitor_load_lo: 80
monitor_hash_lo: 125
monitor_shares_lo: 1
gpu5:
disabled: 1
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
fan_speed: 100
kernel: phatk2
kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11
pool_file: /etc/bamt/pools
pool_timeout: 180
monitor_temp_lo: 45
monitor_temp_hi: 80
monitor_load_lo: 80
monitor_hash_lo: 125
monitor_shares_lo: 1
gpu6:
disabled: 1
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
fan_speed: 100
kernel: phatk2
kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11
pool_file: /etc/bamt/pools
pool_timeout: 180
monitor_temp_lo: 45
monitor_temp_hi: 80
monitor_load_lo: 80
monitor_hash_lo: 125
monitor_shares_lo: 1
gpu7:
disabled: 1
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
fan_speed: 100
kernel: phatk2
kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11
pool_file: /etc/bamt/pools
pool_timeout: 180
monitor_temp_lo: 45
monitor_temp_hi: 80
monitor_load_lo: 80
monitor_hash_lo: 125
monitor_shares_lo: 1
![[SAJ]ber Kurajber](/data/avatars/m/4/4607.jpg?1719193757){kind=avatar}
, sad mi krvo sto pre dva dana nisam kupio coin-e po 15.5 $, gledao cube zero na tv preko noci i malo pratio vrednost 
