Šta je novo?
Od:
Filteri

Catalyst 9.4

Pa lepo je da se zna :)
 
Samo da ne greje cip kao 9.3 i sve ce biti super ;)
 
Konacno ih i postavili, nadam se da ce problemi sa iskakanjem u desktop sa nekim igrama u W7 biti rijeseni.
 
KOliko sam uspeo ovako na brzinu da primetim HAWX mi se ponasa malo gore,tj s vremena na vreme kao da malo propadne sto sa 9.3 nije radio temperature iste kao na 9.3 ,videcemo danas akko ce se pokazati
 
Imam Sapphire HD4870, instalirao sam Catalyst 9.4, i odmah sam primetio da mi je 'fan speed' na 16% a uvek je bio na 12% u idle, temp. je takodje veca za 2C i vise stepena, sada je 48C u idle, a bila je 46 i manje. Ja ne znam kako je moguce da bude ovolika razlika.. :mad:
 
New Features

This section provides information on new features found in this release of the Radeon™
Display Driver. These include the following:

* ATI Catalyst™ 9.4 - New ATI OverDrive™ auto-tuning application


ATI Catalyst™ 9.4 - New ATI OverDrive™ auto-tuning
application*

* ATI Catalyst 9.4 includes a new ATI Overdrive™ auto-tune application to accurately determine the best over-clocked engine and memory values for ATI Overdrive supported ATI Radeon™ Graphics accelerators
* Designed for the ATI Radeon™ HD 4000 Series


* AMD’s product warranty does not cover damages caused by over clocking, even when enabled via AMD OverDrive software

Resolved Issues for the Windows Vista Operating System

This section provides information on resolved issues in this release of the ATI Catalyst™
Software Suite for Windows Vista. These include:

* "World of Warcraft" or "World of Warcraft - Wrath of the Lich King": Flickering no
* longer occurs when Shadow is set to medium/high using CrossFire
* Google Sketchup no longer displays blank screen
* Resolutions above 10 x 7 will now full screen properly for specific HDMI displays
* Artifacts no longer visible while playing Age of Conan DX10
* VC-1 progressive disc playback no longer exhibits block corruption


Resolved Issues for the Windows XP Operating System

This section provides information on resolved issues in this release of the ATI Catalyst™
Software Suite for Windows XP. These include:

* The Compute Abstraction Layer (CAL) driver now functions properly under Windows XP
* Overlay Theatre Mode display no longer corrupt after enabling 3D screen saver
* OS Display Settings no longer shows extra resolutions for Component Video


Resolved Issues for the Windows 7 Operating System

This section provides information on resolved issues in this release of the ATI Catalyst™
Software Suite for Windows 7. These include:

* City of Villains: Display now redraws correctly after changing graphics settings
* Catalyst Control Center: 1080i@30hz and 1080i@25hz Component Video modes can now be applied via Component Video - Advanced aspect
* Custom formats modes can now be applied properly and will be available under "List All Modes"
* Display profiles will now be restored when displays are swapped while the system sleeps
* WinDVD9 HD playback doesn't cause the desktop to jitter or flicker anymore
* Device Manager no longer displays error during express driver uninstall


Known Issues Under the Windows Vista Operating System

This section provides information on known issues that may be experienced under the
Windows Vista operating system with the latest version of Catalyst™. These include:

* AVIVO converter may fail to convert h.264 avi video to another format
* “Unsupported file formats” error message dialog may occur when selecting H.264, mp4 and VC1 file formats
* “CCC Host application...” error message dialog may occur when cancelling a transcoding process
* Output media file size differs after transcoding multiple times to the same format
* The ATI AVIVO video transcoder does not currently use GPU acceleration under Windows Vista 64-bit edition
* Both LCD and CRT may go blank when hotplugging the CRT to the system, and will not recover until it is switched to discrete GPU
* DVD playback may cause the system to stop responding after resume from S3/sleep
* Frames may be dropped when playing Blu-ray video with PowerDVD8
* "Fan Speed Control" may change to default settings when Crossfire is
* enabled/disabled
* Audio Control Panel might show the HDTV entry even when unplugged
* Rotation may not work if Aero mode is turned off
* Call of Duty 5: Some corruption may be visible
* Audio Control Panel might not reflect configuration change from 7.1 Audio to Stereo
* Running OpenGL applications in windowed mode on extended desktop may cause the secondary display to go blank for some ASICs
* Catalyst Control Center: On "Available Display Devices" detection page, when
* selecting the secondary display, the radio button is not greyed out for the monitor already chosen as the main display
* Corruption might be observed in some OGL games with Super Anti-Alias and "Show CrossfireX" enabled on 3-4 display configurations
* Fallout 3 with QUAD Crossfire may flicker at specific resolutions
* Second adapter will run at custom GPU clock values instead of default mininum clock values until a 3D game is launched and exited in full screen mode


Known Issues Under the Windows XP Operating System

The following section provides a summary of open issues that may be experienced under
the Windows XP operating system in the latest version of Catalyst™. These include:

* Transcoding a VOB DVD file (18min source file) results in 2.27min output file
* Transcoding falls back to CPU after transcoding to DVD/MPEG2 multiple times in XP
* Media files transcoded using CPU instead of GPU in XP MCE OS
* Garbled text may appears on resume splash screen after hibernation with some ASICs
* OS Display Settings shows extra resolutions for Component Video
* A performance drop may be observed on Enemy Territory Quake Wars, Doom3 and Quake4
* Fan Speed Control is missing in OverDrive5 aspect


Known Issues Under the Windows 7 Operating System

The following section provides a summary of open issues that may be experienced under
the Windows 7 operating system in the latest version of Catalyst™. These include:

* Moving a video clip file across an extended desktop may causes Windows Media player to stop responding on ATI Radeon 31xx, 24xx devices
* Display configuration changes in extended desktop may take longer than normal to apply
* Catalyst Control Center: Advance Color page, when enabling the advanced color settings the preview window may blank out
* Opening Catalyst Control Center may result in an error message when using Dual Adapters with a non-ATI ASIC and ATI ASIC
* Switching amongst Virtual Desktops may cause certain applications on one virtual desktop to move to another virtual desktop
* Catalyst Control Center: Enable dialog reposition does not show on proper monitor when system is configured with 4 displays
* Catalyst Control Center page is missing under OS Display Properties
* Confirmation dialog box might not appear when applying HDTV 720p and 1080i
* formats; the resolution will be applied automatically
* Catalyst Control Center: At the end of the auto-tuning, it might not report that the process has completed successfully
* Power Cinema may have to be launched twice to start Blu-ray playback
* Moving a video clip across an extended desktop may cause the desktop to flicker or the media player to stop functioning
* Component Video may be missing modes by default
* Device manager mistakenly identifies the adapter as Standard VGA Adapter for some ASICs
* Interlaced modes might not be listed in the "List All Modes" window with HDTV supported DFP panels
* "Yes" and "No" buttons might disappear while moving confirmation windows on
* desktop during driver installation
* Interlaced modes might not be applied on HDTV supported DFP panels even when forced via Catalyst Control Center
* Restricting the maximum refresh rate and resolution via Catalyst Control Center may fail to apply
* Changes to display resolutions may fail to apply for Component Video and S-Video
* Catalyst Control Center: Image Scaling settings might not be applied
* Avivo Video Converter option is not available for Windows 7
Kliknite za proširenje...

Forum-ATI Catalyst

download
 
Poslednja izmena:
E ovako..Neke moje impresije posle 20 min koriscenja istih..Prvo FPS je uglavnom isti,tj warhead bench daje isti fps..ALI opet ovi drajveri dosta greju karticu,mozda cak i vise od 9.3 verzije..Temperatura memorije je skocila za okvirno 1-2C,gpu temp je okvirno ista,mozda 0.5-1C veca.Ja ne znam sta se ovo desava,ali po meni su najbolji drajveri bili 9.2,razmisljam da se vratim na njih cak iako ne ganjam neke dobre temperature jer grafika radi na default taktovima.
Valjda ce ATI napokon poslusati malo svoje korisnike i uraditi nesto sa catalystima i napraviti ih dostojnim proizvodom.
Edit,dopuna:
Tokom instalacije po prvi put mi se pojavio neki "Zero display device error"..Sve je proslo ok nakon toga,samo me buni sta je to,iako za sada sve deluje da radi normalno.Zna li neko o cemu se radi?
 
Poslednja izmena:
jafazec je napisao(la):
E ovako..Neke moje impresije posle 20 min koriscenja istih..Prvo FPS je uglavnom isti,tj warhead bench daje isti fps..ALI opet ovi drajveri dosta greju karticu,mozda cak i vise od 9.3 verzije..Temperatura memorije je skocila za okvirno 1-2C,gpu temp je okvirno ista,mozda 0.5-1C veca.Ja ne znam sta se ovo desava,ali po meni su najbolji drajveri bili 9.2,razmisljam da se vratim na njih cak iako ne ganjam neke dobre temperature jer grafika radi na default taktovima.
Valjda ce ATI napokon poslusati malo svoje korisnike i uraditi nesto sa catalystima i napraviti ih dostojnim proizvodom.
Edit,dopuna:
Tokom instalacije po prvi put mi se pojavio neki "Zero display device error"..Sve je proslo ok nakon toga,samo me buni sta je to,iako za sada sve deluje da radi normalno.Zna li neko o cemu se radi?
Kliknite za proširenje...

probaj ovo
 
Da li su sredili problem sa PixelFormat opcijom kod HDMI podešavanja.
Do sada je uvek bio default Full RGB, kada se promeni i odabere Limited RGB nakon restarta mašine ne zapamti to podešenje, nego uvek forsira full.

Ne može ni preko profila da zapamti to setovanje...
 
***, "200 godina" ne mogu da naprave drajvere koji samo rade a ne prave njesra.

Ne zalim se licno, moj HD4830 radi, nemam problem za sada, ali zbog ovakvih iskustva ne upgrade-ujem driver koji me lepo sluzi :)

Hint: Neka zaposle ljude koji rade u suparnickom taboru i problem solved!
 
Evo ja sam danas malo drndao kartu u pitanju je karta iz potpisa i nemam nikakve zamerke,Axel rece da mu je fan na vecoj brzini + veca temp,to sam bas proverio i meni je od 8.12 do ovih sada temp uvek bila ista kao i brzina obrtanja venta.

sto se tice mana nema ih kao ni prethodni drajveri,osim sto u cod5 s ovim drajverima nema vise bele linije na ivici vode koliko primecujem tako da sam ja zadovoljan ovim drajverima i nemam za sada nikakvu zamerku
 
Vidim pominju se ponovo skakanja temperature. Ja jos nisam stigao da ih probam, ali mi se cini da cu i dalje biti osudjen na 8.12 koji mi je do sada najbolje radio...
 
Hehe ... code43 opet ... ostajem na 8.11
 
Rasturio sam crossfire ... prodajem kartice pa da probamo nesto novo
 
sa ovim a i predhodnim drajverima overklok preko rive mi uopste ne funkcionise.sta mislite u cemu je problem?
 
Greje definitivno par stepeni u odnosu na 9.3b i 9.4b. Ne znam zašto, 9.3b mi je radio extra... Al me mrzi sad da vraćam te drajvere.
 
Kao što primetih kod ortaka... nažalost 9.4 ne podržava 1650pro a mislim da neće ni one ispod nje...
 
ATi je i napomenuo da ce od 9.4 verzije katalisti podrzavati kartice od HD2xxx serije pa navise.
 
Jel' uspeo neko da nadje neko zaobilazno resenje za overklok MSI 4830, jer kao sto neki od vas znaju posle 9.1 drajvera ovi noviji "ne podrzavaju" overklok MSI 4830 kartica, probao sam i Rivu i ATT i Ati Tool, nema vajde? Takodje menjanje biosa kartice.
 
Namerno su oni to uradili, takav je bios karte. Ima o tome na AMD i MSI forumu.http://forum-en.msi.com/index.php?board=9.0
Imas ovde link za 9.5 beta i neku opciju bez CCC-a.RBE ne cita napone za ovu kartu ,neznam da li moze da se izmeni bios od XFX-a pa da se flesuje.Bilo bi dobro ako neko moze da odradi,ako u opste moze.(ja sam probao sa menjanjem Video Card ID,ali nece da je flesuje).Mozda ce i oni izbaciti novi bios ako na forumu bude vise zahteva?
 
Radi, ali bez CCC-a.Instaliras samo drajver i onda flesuj kartu sa 700/1000,ili neki drugi bios. Nadam se da ce 9.5 u fulu srediti i to sa CCC-om.:wave:
 

Prilozi

  • Untitled.jpg
    Untitled.jpg
    42.8 KB · Pregleda: 42
  • GPU-Z.gif
    GPU-Z.gif
    17.2 KB · Pregleda: 45
  • GPU-Z a.gif
    GPU-Z a.gif
    13.5 KB · Pregleda: 39
Vecna nada da ce neki novi draveri nesto srediti i popraviti, sto se naravno nikad ne desava, da nije tako ove ATI karte bi bile dosadno dobre:)
 
Ma mrka kapa od toga, ima da dočekamo verziju 11.12 pre nego što ispeglaju sve glupave probleme. Što se tiče Viste mislim da su je u ATI-u zaboravili i da su svu pažnju usmerili na Win 7. Tako da trenutno ostaje dobri stari XP ili beta Win 7.

Inače CF 4830 sam rasturio upravo zbog problema sa drajverima.
 
spaad je napisao(la):
Radi, ali bez CCC-a.Instaliras samo drajver i onda flesuj kartu sa 700/1000,ili neki drugi bios. Nadam se da ce 9.5 u fulu srediti i to sa CCC-om.:wave:
Kliknite za proširenje...

Hvala Spaade, odoh da zavrsim posao sa ovim drajverima, pa mislim stvarno ga preterase, dosadise mi 9.1 drajveri! :)
 
Sharpshooter je napisao(la):
Inače CF 4830 sam rasturio upravo zbog problema sa drajverima.
Kliknite za proširenje...


Uh, steta je to zaista, kad si je vec sklopio. Ja se dvoumim da li da pravim CF varijantu, ali ne toliko zbog drajvera, vec zbog lose ponude igara. Za sad i jedna 4830 radi posao vise nego korektno, pa mi je tesko da odvojim jos 90e za jos jednu :p
 
e jedno pitanje za strucnije
sad sam negde procitao da je zbog igrica bolje u catalystu iskljuciti VPU recover
pa da li je bolje ili ne
 
kali je napisao(la):
e jedno pitanje za strucnije
sad sam negde procitao da je zbog igrica bolje u catalystu iskljuciti VPU recover
pa da li je bolje ili ne
Kliknite za proširenje...

Bolje je, može nekad da te zeza u igrama.:wave:
 
Morate se prijaviti ili registrovati da odgovorite ovde.
Nazad
Vrh Dno