Šta je novo?
Od:
Filteri

AMD Driver Timeout (RX6900XT)

Proveri ti koju verziju HWInfo64 imaš.
 
Nema te stavke na novijim kartama, normalno je.
 
  • Like
Reagovanja: kVu
Poslao sam poruku iz ASUS podrske, pa cu samo da je iskopiram sto sam je napisao na engleskom:

Also, one more question:

I didn't know you can update VBIOS of your GPU, and I found it on your website asus.com, and here's the link https://rog.asus.com/graphics-cards...rx6900xt-t16g-gaming-model/helpdesk_download/

On the website,the latest GPU VBios is published on August 28, 2022, yet my GPU is using updated on May 11, 2021. https://prnt.sc/NaRZyeotTO9F

Can that be the cause of my issues too?

By the way, when I try to install it, it doesn't allow me and says I should install AMD drivers first (which I did)

Also, this my the recommended PSU table, and these are my specifications https://prnt.sc/_Du_vKi-6aDs

AMD Ryzen 9 7900x
AMD RX 6900 XT
CoolerMaster MWE 850 GOLD V2

As you can see, my PSU is 850W, instead of 1000W, which is recommended in the table.

Can that be the root cause as well?

Thanks!

Takodje, hocu da dodam jos ovo: Cemu sluzi ovo i da li to moze da utice na performanse, narocito Dote koja je starija igrica? https://prnt.sc/1Pt_IqcCUffx

I za kraj, preko ovog sajta sam testirao kako mi radi graficka kroz Directx11, 12 i Vulkan https://gravitymark.tellusim.com/

Evo rezultata
prnt.sc

Screenshot

Captured with Lightshot
prnt.sc prnt.sc
prnt.sc

Screenshot

Captured with Lightshot
prnt.sc prnt.sc
prnt.sc

Screenshot

Captured with Lightshot
prnt.sc prnt.sc
 
Okej, otvorio sam kuciste, prebacio VBIOS sa P (performance) na Q (quiet) mode, pa cemo da vidimo kakve ce rezultate da da.

Sto se tice konektora, samo napajanje mi je unutar svog kucista, pa nisam to otvarao, ali ova tri konektora (ako je to to) su dobro povezana. Evo i slike https://prnt.sc/BTl2C4Q7GqcQ

Takodje, video sam da pozadi ima jedan BIOS USB port, pa sam citao malo i video da je on namenjen za instalaciju BIOSa. Medjutim, ja sam to radio sa ovog prednjeg USB 3.0 porta, pa ne znam da li to zapravo pravi neku razliku.
 
namenjen za instalaciju BIOSa maticne ploce, mozes bilo koji USB port da koristis. taj jedino ako hoces da update BIOS ploce bez cpu
 
Hvala.

Drugari, znam da sam mnogo ugnjavio, ali cini mi se da je kompjuter dosta stabilniji (iako su se desavali crashevi). Neka prodje jos par dana, pa ako se pokaze kao stabilno, fresh instalaciju Windowsa cu da uradim jer sam dosta stvari menjao, ispravljao, itd.

Medjutim, juce od kako sam promenio Dual BIOS sa P (performance) na Q (quiet), nije bilo nikakvih problema.

Takodje, jedan od konektora (HD Audio) koji ide u maticnu plocu je bio labav, pa sam ga lepo ubacio. Da li mozda to moze da bude problem, iako nema direktnih veza sa GPU?
Stvari koje nisam probao:

1. Updateovanje GPU VBIOSa, ali to ne mogu da uradim zbog neke greske https://prnt.sc/mBZeXXBil-I4. GPU VBIOS sam skinuo direktno sa njihovog sajta https://rog.asus.com/graphics-cards...rx6900xt-t16g-gaming-model/helpdesk_download/
2. Drugo napajanje posto na sajtu stoji da bi bilo idealno da bude 1000W, iako je minimal requirements 850W, sto ja imam. https://prnt.sc/_Du_vKi-6aDs
3. Druga graficka - ovo mi je bukvalno poslednje sto bih uradio pre same reklamacije.
 
Jos jedna stvar,

Meni je monitor povezan sa grafickom preko Display Porta 1.4. i tu imam 2560x1440p rezoluciju i 270hz refresh rate.

Medjutim, citao sam da je HDMI 2.1 superiorniji u odnosu na dp1.4, ali ja kada sam iskoristio neki svoj HDMI kabl koji sam imao ovde, on mi je omogucavao 4K rezoluciju, ali 144hz refresh rate najvise.

Pa mene sad zanima, je l to problem do kabla, i ako jeste, gde mogu da nabavim kvalitetan hdmi 2.1. kabl, a ako nije, u cemu je caka?

Takodje, ako su mi povezani i DP i HDMI u isto vreme sa monitorom, onda HDMI nece da prepozna.

Hvala!
 
850W je dovoljno za tu graficku.

Sa Display Port 1.4 imas 1440p 270Hz ali sa 8 bit color depth, sto je dovoljno za vecinu stvari. Sa HDMI 2.1 kablom bi mogao ukljuciti i 10bit color depth ali je po meni nebitna stavka.

Nemoj ukljucivati oba kabla na monitor pobogu, mozes samo problem da napravis.
 
Da da, display port 1.4 samo koristim, i on je superiorniji u odnosu na hdmi 2.0 koji moj monitor podrzava. Iskljucen mi je hdmi.

Okej, cekam da vidim da li mogu ovi iz ASUSa da mi rese problem oko VBIOS updatea, i to je bukvalno sve sto sam mogao da uradim, ako uzmemo u obzir da je napajanje okej.
 
Ljudi, problem je i dalje tu.

Sve zivo sam probao softverski, kao sto je:

1. Reinstalacija Windowsa (11 koristim inace)
2. Driver update/reinstall (raznorazne verzije sam probao)
3. Overclock/undervolt CPU/GPU (da li default ili ukljuceno, ista prica)
4. Resize Bar on/off
5. Disable MPO
6. Extend TdrDelay
7. I jos mnooooge stvari koje sam nasao na internetu.
Cak sam promenio i CPU i RAM (imao sam Ryzen 9 7900X i KINGSTON DIMM DDR5 16GB 5600MT/s KF556C40BBA), ali bez rezultata.

Takodje, radio sam testove u OCCT, HWInfo32, HWMonitor, FurMark, i svi izvestaji ne prijavljuju nikakvu gresku - temperature, voltaze i ostalo je sve u savrsenom redu.

Cini mi se da mi nista drugo ne preostaje osim da promenim komponente, ali nisam siguran da li je grafika, napajanje ili maticna ploca.

Nemam vise zivaca da se cimam, pa cu da kupim drugu komponentu, samo nisam siguran koja komponenta je glavni osumnjiceni.
 
Iz jede od tema na reditu:

Update 3/8/2025: Upgraded to driver 25.3.1, have not had to custom tune just yet, not ran into a crash so far with it. Maybe they fixed it finally? (doing some testing across multiple titles to check). I would say try this first before doing the below at this point.

Do this to fix your Radeon driver timeout issue!

Reinstall Driver first, tick "Factory Reset" to clear all settings. On first start, select the "Default" profile (not Hypr-Rx). This step is necessary to help keep custom max frequency between sessions/reboots.
Afterwards, Go to Performance->Tuning, click Manual Tuning "Custom", Enable GPU Tuning and Enable Advanced Control. Look up your cards clock timings, and enter in the max boosted clock for the max frequency (again, 2650Mhz in my case) - If the max boosted OC doesn't work for you then step down to the game clock setting (which is the average OC for gaming for your card's spec).

I believe what may be happening with the driver is that by default it is set for automatic tuning, which goes as high as 2900Mhz clock speed (some people have reported higher) - set by Hypr-RX. An RX7600 however, for example, is a base clock of 2250Mhz and boosted clock (OC) of 2650Mhz. So as soon as the auto tuning goes into S7 it cranks it up to that 2900Mhz which then causes the crash/driver timeout issue. Basically they overclock you past the maximum of your card's specs.

The fix is to manual tune your GPU and set the maximum frequency (2900Mhz by default for me) to the max boosted clock frequency (2650Mhz in my case - check your card specs). Have been able to game finally without crashing. Make sure to also turn off Hypr-RX profile or it'll overwrite your changes and set max clock again out of bounds (it puts back 2900 in max frequency for some dumb reason, overwriting the fix). Set your profile to the Default profile (which turns off RSR, etc.) Once you are stable, you can turn back on RSR, Fluid Motion Frames, and whatever other feature you'd like. I recommend those two for maximum FPS boost. On Helldivers2 I average around 150fps and haven't crashed since doing this. Am able to play for hours on end.

2nd:

sharing something that's worked for me... shoutout to northwestrepair on youtube

device manager> sound, video and game controllers> disable all AMD audio devices

turns out that the audio drivers are clashing with everything else.. if you are using HDMI audio out, bless you but this has so far worked for me.

I've ran heaven benchmark, 3dmark and adrenalin's built in stress test and have all passed without a hitch... everything is working the way it should.
 
Poslednja izmena:
Morate se prijaviti ili registrovati da odgovorite ovde.
Vrh Dno