Che_Guevara
Čuven
- Učlanjen(a)
- 15.05.2002
- Poruke
- 108
- Poena
- 619
Koja je prica:
Vrsio sam upgrade firmware-a mog CD rezaca i nisam citao readme. Necu da vam pisem za posledice...
a evo sta je pisalo u readme...stavicu samo neke detalje...
To update the firmware of the GCE-8526B please refer to the following instructions:
¡Ø Critical Instructions: (to be followed carefully)
1. Connect the drive as¡°master¡±by it self, on the secondary IDE controller
with no other device on the same IDE cable, making note to set the jumper
on the back of the drive to the¡°master¡±position.
Nisam uradio...on je bio primary slave i moj glavni HDD (80GB) je bio primary master (da prevedem. trebao sam na jednom IDE kablu drzati samo taj CD i da on bude master)
2. Download the file GCE-8526B104(EW).ZIP to a folder of your choice. This download includes this¡°Readme(ew)¡±text file, as well as the GCE-8526B104(W).EXE program, which will auto-update your drive¡¯s firmware.
3. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC, during the update process,
thus interrupting the update and damaging the drive).
imao sam jos dve aplikacije ukljucene mada nemaju veze sa screen saverima i power-down programima kao i AVG Free AV program, imaju veze sa nekom drugom pricom.
4. Check the drive to ensure that there is no disk in the tray
before you start the update procedure.
5. Go into the folder with the update file and double click the GCE-8526B104(W).EXE program.
Firmware upgrade will be automatically started.
When the UPGRADE is complete the 'WINDOWS FLASH UTILITY' should indicate
"Restarting CDROM...." and "Complete"
ja sam pritisnuo close kada je prvi put bilo enable-ovano, a to je bilo na restarting CDROM...
The update will be complete, after you reboot your system.
WARNING: Do not open any programs or start any system functions during the update, as they will interfere with data transfer and damage the drive. Do not cancel the operation once it has been started or the drive will become permanently damaged, as a result.
E ja sam bio na netu dok sam ovo radio, i nisam nista pokretao, ali je moja sestra brze bolje u'vatila putty da proveri mail i konektovala se i proverila mail.
I recite mi da li je jos neko ovoliki ***** kao ja?
Posledice:
1)LG CDRW 52/32/52 ne radi(blokiran mozda moze da se sredi ali ne smem da ga stavljam u racunar jer blokira(usporava) BIOS)!
2)LG DVD citac ne radi pod windows-om, a ja uspevao i da pokrecem bootabilne CDove, treba srediti...
3)HDD 80GB NE RADI KAO MASTER, vec kao slave...
i kao sto moj kolega thinker kaze...
Ojha!
ovaj put ja placam....
(((
P.S. savet trazim...
Vrsio sam upgrade firmware-a mog CD rezaca i nisam citao readme. Necu da vam pisem za posledice...
a evo sta je pisalo u readme...stavicu samo neke detalje...
To update the firmware of the GCE-8526B please refer to the following instructions:
¡Ø Critical Instructions: (to be followed carefully)
1. Connect the drive as¡°master¡±by it self, on the secondary IDE controller
with no other device on the same IDE cable, making note to set the jumper
on the back of the drive to the¡°master¡±position.
Nisam uradio...on je bio primary slave i moj glavni HDD (80GB) je bio primary master (da prevedem. trebao sam na jednom IDE kablu drzati samo taj CD i da on bude master)
2. Download the file GCE-8526B104(EW).ZIP to a folder of your choice. This download includes this¡°Readme(ew)¡±text file, as well as the GCE-8526B104(W).EXE program, which will auto-update your drive¡¯s firmware.
3. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC, during the update process,
thus interrupting the update and damaging the drive).
imao sam jos dve aplikacije ukljucene mada nemaju veze sa screen saverima i power-down programima kao i AVG Free AV program, imaju veze sa nekom drugom pricom.
4. Check the drive to ensure that there is no disk in the tray
before you start the update procedure.
5. Go into the folder with the update file and double click the GCE-8526B104(W).EXE program.
Firmware upgrade will be automatically started.
When the UPGRADE is complete the 'WINDOWS FLASH UTILITY' should indicate
"Restarting CDROM...." and "Complete"
ja sam pritisnuo close kada je prvi put bilo enable-ovano, a to je bilo na restarting CDROM...
The update will be complete, after you reboot your system.
WARNING: Do not open any programs or start any system functions during the update, as they will interfere with data transfer and damage the drive. Do not cancel the operation once it has been started or the drive will become permanently damaged, as a result.
E ja sam bio na netu dok sam ovo radio, i nisam nista pokretao, ali je moja sestra brze bolje u'vatila putty da proveri mail i konektovala se i proverila mail.
I recite mi da li je jos neko ovoliki ***** kao ja?
Posledice:
1)LG CDRW 52/32/52 ne radi(blokiran mozda moze da se sredi ali ne smem da ga stavljam u racunar jer blokira(usporava) BIOS)!
2)LG DVD citac ne radi pod windows-om, a ja uspevao i da pokrecem bootabilne CDove, treba srediti...
3)HDD 80GB NE RADI KAO MASTER, vec kao slave...
i kao sto moj kolega thinker kaze...
Ojha!
ovaj put ja placam....
(((P.S. savet trazim...
