U konkretnom slucaju, za teacov 40x rezac (w540e) mislim da se flashuje iskljucivo iz win-a, tako su napravili updater, pa npr. ako se to radi pod w2k ili wxp onda je potrebno imati i admin. privilegije. Dakle, dole je info iz uputstva za flashovanje w540e
3. Precautions in executing this program
3-1. Remove any discs from the CD-W540E before executing this program.
3-2. Do not try to access the drive while update is in process.
3-3. The firmware update may not work properly while certain packet
writing software is installed. In this case, you must first
disable the packet writing software before starting this program.
3-4. UpdaterW540E.exe requires administrator privileges
to run on Windows 2000 and Windows XP.
4. Operating procedure
4-1. Make sure that W540E_10.BIN is in the same Folder
as the UpdaterW540E.exe file.
4-2. Execute UpdaterW540E.exe.Read the Licensing Agreement carefully.
If you agree with it, press the Accept button. If you do not
agree, press the Exit button to exit the program.
4-3. The target drive will be indicated in the Target Drive list box.
Read carefully the precautions on the screen. When you press the
Update button, program will ask for your confirmation.
Press Yes to start the firmware update process.
Warning:
Exit Windows Explorer and all the active applications beforehand.
NEVER turn off the power of your PC or drive, shut Down the system,
Or go into Standby mode while executing this program.
Do not force termination of the Operating system, terminate a task
while executing the program.
4-4. When the firmware update has been completed, you will be prompted
to restart the system. Press OK to restart your PC. You must
restart the system for the CD-W540E to work correctly.
If you continue operation without restart,the system may become
unstable or hang.
Dakle, kako pise u uputstvu za instaliranje ovog rezaca, prvo, uredjaj treba da bude master, zatim, pri flashovanju treba iskljuciti packet writing programe (tipa INCD, DirectCD; nisam siguran za ugradjenu winxp recording podrsku - ja je odma iskljucim cim se instalira win), zatvoriti sve aktivne aplikacije, izvaditi zaostali cd iz uredjaja, pokrenuti updater, ne gasiti racunar, nakon zavrsetka restartovati masinu sto ce biti ponudjeno. Nakon ovoga moguce je da ce pri sledecem restartu win ponovo prepoznati (kao nov) rezac (sto nema bitnih posledica), i to je to.
***
@milanbb
Mislim da je par ljudi ovde imalo taj problem (da mora da se uradi eject da bi se prepoznao cd) kada su prelazili na noviji firmware kod w540e (pa su se vratili na stari). Ja sam imao problem da mi nakon rezanja u nero (i nakon njegovog zatvaranja) win ne prepoznaje VolumeID cd-a iako tacno prepoznaje sadrzaj, al` je to otklonjeno kada sam deinstalirao InCD. Btw, drzim winXP i iskljucenu recording podrsku. Da nije do ovog poslednjeg.
Kako ovo lepo moze da se primeni i na politiku u ovoj zemlji. Svi politicari flesovase iz dosa :beat:
