Šta je novo?
Od:
Filteri

Pomoc oko VMWare-a?

Status
Zatvorena za pisanje odgovora.
moras da instaliras operativni sistem, drajvere itd... isto kao sto bi uradio sa novim kompom.
 
markokikinda je napisao(la):
ali kako?
Ne kontam jel mi treba cd od tog os-a il sta? Jel to treba da uradim na onoj particiji sto sam napravio? I kako se to brise?
Kliknite za proširenje...

Treba ti CD od bilo kog Os-a. VMWare služi da instaliraš OS u samo jednom prozoru tako da ne takne Wind0w$. Prednost je što možeš bez bojazni da probaš sve ostale operativne sisteme. VMWare kao HD koristi samo jedanu datoteku na tvom NTFS ili FAT disku i sve što snima u novi operativni sistem se nalazi u toj datoteci. On te za nju pita pri pravljenju nove sesije, tj. pita kolika datoteka na win particiji da "glumi" novi hd.

Nadam se da sam pomogao
 
kada startujes vmware isto je kao kada ukljucis drugi komp, koji na pocetku nema nista od softvera samo hardver. znaci formatirenje diska prvo (partition magic i sl. programi sa bootabilnog diska) pa onda instalacija sistema, pa drajveri pa programi...
 
jel si uopste nekad instalirao sistem na kompu????????
 
markokikinda je napisao(la):
aha al ne kontam :(
Kliknite za proširenje...
Ama taj "hard disk" što ti sistem nudi da formatira je virtuelni hard disk, znači slobodno udri format, ništa se neće desiti sa pravim hard diskom na kome ti je Windows.
 
markokikinda je napisao(la):
Evo udario sam format i instalira se win98. Sam me jos nesto interesuje...
Kada budem zaustavio VM (NPR. Win98) mogu da je obrisem iz v foldera?
Kliknite za proširenje...
NE! Onaj veliki fajl u My Virtual Machines folderu je upravo taj virtueln hard disk.
 
markokikinda je napisao(la):
Pa to ... Ako necu da ga koristim mogu da ga obrisem? (Ako necu da teram taj OS vise)
Kliknite za proširenje...

Batali ti to. Nije to za tebe.
 
Marsovac je napisao(la):
Dakle?
Kliknite za proširenje...
???

jaksa je napisao(la):
Jesi li ti pogledao malo ova uputstva?
Kliknite za proširenje...

jesam. sto?
Installing a guest operating system inside a virtual machine is essentially the same as installing it on a physical
computer. The basic steps for a typical operating system are:
1 Start Workstation, VMware ACE Manager or a VMware Virtual Machine Console and connect to the
virtual machine.
2 Insert the installation CD‐ROM or floppy disk for your guest operating system into the CD‐ROM or
floppy drive being used by your virtual machine.
ESX Server: You must insert the installation CD‐ROM or floppy disk in the drive on the server where the
virtual machine is running. You cannot use the drives on your management workstation.
GSX Server: If your guest operating system requires a floppy disk, you must insert it in the drive on the
server where the virtual machine is running. You cannot use the floppy drive on your management
workstation.
NOTE Rather than boot from a physical CD‐ROM, you might wish to create an ISO image file from the
installation CD‐ROM. You can store the ISO file on the host machine or on a network drive
accessible from the host machine. Use the configuration tool for your VMware product to
connect the virtual machine’s CD drive to the ISO image file, and then power on the virtual
machine.
Using an ISO image file in this way can be particularly convenient if you need to install the same operating
system in multiple virtual machines. It can also help you work around a problem seen in some host
configurations, in which the virtual machine is not able to boot from the installation CD‐ROM.
NOTE If you plan to use a PXE server to install the guest operating system over a network connection,
you do not need the operating system installation media. When you power on the virtual
machine in the next step, the virtual machine detects the PXE server.
3 Power on your virtual machine by clicking the Power On button.
4 Follow the instructions provided by the operating system vendor.
As with physical computers, a separate operating system license is required for each virtual machine you run.
NOTE Some Microsoft Windows OEM discs included with new computers are customized for those
computers and include device drivers and other utilities specific to the hardware system. Even if you
can install this Windows operating system on your physical computer, you might not be able to
install it in a virtual machine. You might need to purchase a new copy of Windows to install in a
virtual machine.


Installation Steps
1 Insert the Windows Me CD in the CD‐ROM drive.
2 Power on the virtual machine to start installing Windows Me.
3 Choose to boot from CD‐ROM, and then select the option Start Windows Me Setup from CD‐ROM. The
setup program runs FDISK and reboots.
4 Once again, choose to boot from CD‐ROM, and then select the option Start Windows Me Setup from
CD‐ROM. The setup program continues installing Windows Me.
5 Follow the Windows Me installation steps as you would for a physical machine.
VMware Tools
Be sure to install VMware Tools in your guest operating system. For details, see the manual for your VMware
product or follow the appropriate link in the knowledge base article at
www.vmware.com/support/kb/enduser/std_adp.php?p_faqid=340.
Kliknite za proširenje...
to je nejasno?

ili da ne pejstujem sad
strana 137
Installing a Guest Operating System
and VMware Tools
u ws55_manual.pdf sa sve slicicama
 
Poslednja izmena:
Mislim da je jaksino pitanje bilo upuceno markokikindi a ne tebi filo :)

Elem markokikinda, batali to batice plz. Ili bar procitaj manual prvo.
 
a
sorry
valjda lakse kukati na becnhu nego citati uputstva
 
Poslednja izmena:
A i ono sto je marsovac napisao, isto je upuceno pokretachu treda ;)
 
Filo je napisao(la):
a
sorry
valjda lakse kukati na becnhu nego citati uputstva
Kliknite za proširenje...

Citanje je opasno, mozes da nacuis nesto....:D
 
Mene ovo jako podseca na 'Slucaj Ogi."
 
Status
Zatvorena za pisanje odgovora.
Nazad
Vrh Dno