Pomoc oko rabita

[masnikosa]

Pozdrav svima.Rabit program mi pokazuje sledece>
-- RaBiT v.1.5.0 build 320 started --
> RaBiT driver v.1.0.5 is loaded
-- Your ATi video adapter low level info --
Vendor: 0x1002, SubVendor: 0x1002 (ATI Technologies Inc)
Device: 0x4153 (RV350), SubSystem: 0x0002
Base address: 0x9000
Chipset Rev. A23
On Board EEPROM: ST M25P05/c
Active pipelines: 4, GB_TILE_CONFIG = 0x00010011
MPP_TB_CONFIG = 0x07FF0000
-- Memory bus and clocking info --
Memory: 128 bits, DDR, 128 Mb
Chipset clock = 249.75 MHz
Memory clock = 195.75 (391.50) MHz
-- Active memory timings --
tWL = 1.0
tCL = 3
tCMD = 0 clock
tSTB = equals tWrL + 1/2 clocks
tRcdRD = 4
tRcdWR = 2
tRP = 4
tRAS = 8
tRRD = 3
tR2W = CL + 3
tWR = 3
tW2R = 2
tW2Rsb = Use tWR Rule
tR2R = 2
MemRR = 24
tRFC = 14
tRBS = CL + 3.5
tERST = CL - 0.5
tQSREQ = CL - 0.5
tDQM = WL - 1
tDQS = WL - 1
tDQM_Adv = As specified
tDQS_Adv = As specified

Sta da promenim za jos malo brzine u far cry i kako?Kad ucitam rabit nemam nista u poljima za podesavanje.kako da ucitam originalni bios sa video kartice da mogu da ga menjam?
MB gigabyte ga-k8ns ,2x256 ddr400,Athlon 64 3000+