FSB Wall at low fsb around 300 - Disable Hyperpath 3 in the Chipset section of the bios. [Credit - lawrywild]
FSB Wall at around 360-370 fsb - Enable SPD timings option in Chipset section of bios.
Extremely slow POST - Disable all Q-Fan controls in "Hardware Monitor", it is working for OBR and myself now. [Credit - OBR]
POST lock up during Detecting IDE Devices - Restart and plug in some USB storage OR change SATA harddrive to other header. [Credit - OPB]
VCore only option Auto - EITHER Flash using AFUDOS and the tags AFUDOS /i****.rom /pbnc /n , then clear cmos as the manual describes [Credit - OPB] OR Disable Speedstep and Enhance C1 Control in the Cpu Configuration section of the BIOS. [Credit - DjLeco]
Slow POST (SATA Only Users) - If you're running all SATA drives (Optical and HDD) .. and are getting slow boot times mark the IDE ports and "not installed" in the bios .. saves you the 30sec detection time for each drive. [Credit - Silver Bullet]
Random 256C cpu temperature bug - Not really a fix but only happens when running CPU-Z.
USB devices don't power off after shutdown - A standard feature of ASUS motherboards.
Motherboard cold boots when you restart - Seems to be a standard feature in the motherboard although it doesn't seem to do it at stock.
BIOS seems to hang when entering Monitoring section - Update to bios 0801 or later. Only seems to happen to certain people.
Keyboard connected via a USB Hub. When system is shut down pressing the keyboard starts the PC. - No fix as of yet, Disabled PS2 Keyboard Startup does nothing to stop this.
Network Disconnecting - Upgrade Marvell Yukon NIC to latest driver;
http://www.marvell.com/drivers/drive...?dId=116&pId=3 [Credit - BulldogPO]
CPU Fan Error upon POST when cpu fan is not connected to onboard header - Set cpu fan to Ignore in Hardware Monitoring section of BIOS.
Remote Control will only shutdown board and does not power it up - Enable "Power on after Power loss" option in the ASUS DH Remote control panel in windows. Also make sure the USB receiver is connected to USB Ports 3 or 4.
