А ево (напокон) и не RC верзије LibreELEC
LibreELEC Hades 1.0 is out
The first version that is not a release candidate.
LibreELEC Hades is an unofficial build of LibreELEC for 64-bit PCs. It sends Dolby Vision from the PC to the TV over HDMI the way Dolby Vision players do, including profile 7 with its full enhancement layer, with HDR10+ and with Dolby Atmos and the other HD sound formats passed through. Underneath it is Kodi, shown as "LibreELEC Hades" because it carries changes that Team Kodi has not approved: please report problems to me on GitHub, not to Team Kodi or LibreELEC.
New in 1.0
- Check this setup (Settings > LibreELEC > System): short test pictures (SDR, HDR10, HLG, Dolby Vision 8.1 and 5) and sounds (each speaker, Dolby Digital, Dolby Digital Plus, TrueHD) say in plain words what reached the TV, and only the sound formats you heard are switched on.
- A player information page that a person can read: press O, or the red key of a CEC remote. The first page says in one sentence whether the video plays as intended and, if not, what to do; the details are behind it.
- A diagnostic report in one file, made with one button, filtered, and copied to a USB drive if you want.
- Dolby Vision profiles 7 and 8 sent as composed by default, the picture of the composer in the YCbCr of the video, bit for bit. Sending IPT-PQ-c2 stays as an expert choice.
- HDR mapped more faithfully: the BT.2390 curve with the knee of the ITU-R report (the previous one stays as a choice), HDR10+ adapted by its own metadata, HDR videos played as SDR by choice, and the trims of the colourist off by default for Dolby Vision mapped by Hades itself (native Dolby Vision output is unchanged).
- HDR above 8 bits where the link would carry RGB at 8: YCbCr 4:2:2 at 12 bits on NVIDIA (on by default) and over HDMI 2.0 on Intel and AMD.
- DVD films play as films: films in interlaced video are rebuilt and played at 23.976, 25 or 29.97 Hz, and soft telecine at 23.976 Hz.
- Displays: a display connected while Hades runs is taken without a restart (same graphics card), and only the display in use is lit, with the sound going to it. An expert setting keeps a separate output on for sound, for an AV receiver on its own HDMI output.
- Dolby Vision on more hardware: the newest Ryzen processors (DCN 4.2 and 4.2B, with a check of the display pipe each time Dolby Vision starts), and passive DP++ adaptors (Dolby Vision, HDR10 and HDMI 3D).
- Safer by default: Run and Live start with DMA translation, so a device can only reach the memory the kernel gives it, where the computer has an IOMMU.
- Boot menu at 5 seconds, and the remote control decoders built from source.
Fixed
- Films that repeat a pivot in their Dolby Vision metadata stay in Dolby Vision, as the specification allows: the Transformers films used to drop to HDR10 because of it.
- Picture in step with its sound: on every driver the picture left one refresh before its sound (42 ms at 24 Hz); Hades now measures when each frame reaches the screen.
- A network drop no longer ends a stream: playback waits, says the connection is interrupted, reconnects and plays on from where it stopped (up to 5 minutes). Stopping a stream whose server does not answer no longer freezes the interface for a minute, and a second video no longer waits for the first or gets lost when the first one fails.
- Passthrough: a pause keeps TrueHD, DD+, DD and DTS sound, with nothing lost or repeated at the resume; five faults of DTS-HD and TrueHD passthrough are fixed, two of them with fixes by tanio99 (for OSMC) and heit88.
- Blu-ray: a disc image over the network (HTTP, .strm) opens with its menu, a VC-1 video in a .m2ts opens at its own rate (not twice it), a second seek pressed quickly is no longer lost, and picture subtitles keep their colours.
- Displays and EDID: the sound no longer jumps to another display when several are connected to an NVIDIA card, and EDID blocks that a display counts are kept when one of them is not valid (Linux and NVIDIA).
- AMD: HDR10 through a passive DP++ adaptor reached the display as no HDR at all; it now arrives as HDR10.
- And more: seven fixes of libCEC, JSON-RPC per connection with five fixes of its server, USB disks stopped cleanly at power off, drive labels shared safely by Samba.
Faster
- Dolby Vision made from HDR10, HDR10+ and profile 8.1 takes about a third less GPU time per frame: the picture of the decoder goes straight into the transport, the same bytes.
- Dolby Vision packing costs less while menus or the player information are on screen, with the same bytes, after ideas from the build of CroqueMr.
- On graphics that cannot keep up, frames with menus over a single-layer Dolby Vision picture are sent converted only where it was measured to help; frames without menus are unchanged.
- TrueHD comes back sooner after a start or a seek (about 320 ms instead of 680).
- A Blu-ray image over the network opens faster: half the requests and half the time at 100 ms of latency.
Up to date: Linux 7.3.4, LibreELEC master, Kodi 22.0rc2 (Piers branch), NVIDIA 620.70.06 and 580.196.07, Intel microcode 20261110, OpenSSL 4.1 and 3.5. Everything else is in the release notes.
Tested on hardware
I tried the final build of 1.0 on my PC: a GeForce RTX 4080 SUPER connected by HDMI to an LG C5 TV, with a TCL Q85H Pro sound bar on the eARC of the TV, and a Samsung Odyssey OLED G6 monitor with HDR10+. These work:
- Native Dolby Vision of profile 7 with its full enhancement layer (the Transformers films and several others, with Dolby TrueHD and Atmos passed through), profile 5 and profile 8.1, and HDR10 sent as Dolby Vision.
- The three Tron films, which had dropped out of Dolby Vision before, play in Dolby Vision.
- An HDR10 film with DTS-HD Master Audio sound.
- The new player information page.
- Moving from the LG C5 to the Odyssey monitor and back from the settings, with the display that is not in use turned off.
- On the Odyssey, which takes HDR10+ and not Dolby Vision: Dolby Vision videos that carry their own HDR10+ go out as HDR10+, and HDR10+ videos go out as HDR10+.
Not tried on hardware yet, so your results are very welcome: Check this setup, streaming through a network drop, DP++ adaptors, the newest Ryzen processors, 1.0 on AMD and Intel graphics (so far only on NVIDIA), HDR at 12 bits on GeForce GTX 16, RTX 20 and newer, the sound that follows the display in use, and DVD and the Blu-ray changes.