Human Sensing Function
1. “Follow” function: It can detect where a person is and adjust the swing flap accordingly and send air to the location of this person. If it detects people in two locations, the swing flap will blow alternatively between these two locations and stay at each location for 15s. If the appliance detects people in three or more locations, the left and right swing flaps will swing automatically. “Avoid” function: When the appliance detects a person in a location, it will adjust the swing flap to avoid such a location. If it detects people in three or more locations, the left and right swing flaps will swing automatically. Note: 1) When there are people in several locations or a person frequently moves between several locations,if this person is in the in-between location or the crossing location, whether the appliance is in a “Follow” mode or an“Avoid” mode, theswing flap will swing automatically to send air to these locations.
2) Whether the setting is “Follow” or “Avoid”, it takes some time to adjust theair direction after the appliance identifies the location of the people and the air direction will not change immediately.
3) If the actual airflow cannot reach (or avoid) the location where a person is due to such factors as fan speed setting, temperature setting, ambient temperature difference and layout of the room, pressing the left and right swing flaps can adjustthe air direction and set the airflow direction by hand.
4) Set the health airflow when the human sensing (including follow/avoid) function is enabled and exit from the human sensing (including follow/avoid) function.
5) Press the upper and lower swing flaps when the human sensing (including follow/avoid) function is enabled, there is no upper and lower full swing status.
6) When the appliance is in the upper and lower full swing status, set the human sensing function (including follow/avoid), the upper and lower swing flaps are in their standard positions of relevant mode.
2. When the human sensing function is enabled, if the appliance cannot detects people for a long time (at least 20 minutes), it will automatically enter the power saving mode. In the power saving mode, the operating frequency will lower down and the fan speed is low. Once a person is detected, the appliance will exit from the power saving mode.
3. When the human sensing function is enabled, the appliance will have a real-time detection of human movements and adjust the frequency and fan speed according to the movements. In the heating mode, if the movements are frequent, the frequency and fan speed will lower down; when the movements become less, the frequency and fan speed will rise but cannot exceed the setting values set by the remote controller. The cooling mode is contrary to the heating mode.
Dok sam trazio, naleteh na ovaj video i izgleda da ima ozbiljan tajmer, gde po satima mozes da podesavas koliko stepeni da bude...sve mi se vise cini da sam bacio pare na Mitsubishi LN

Ispada ta Flexis Plus dosta bolja klima nego sto sam inicijalno mislio, a kupio sam ih samo zato sto su bile crne
Грејање куће је по правилу далеко захтевније јер нема комшија које греју около са више страна. Клима се лако упакује у заштитну кућицу где има потребе.
Da se neko ne zbuni i stavi klimu u kucicu, zastitna kucica je sa krovom, ali busna sa svih strana

Ako nema specificne potrebe, najbolje je ne stavljati je ni u sta.