Ja bi za pocetak ovako:
1. CPU Hyper-Threading (Note) [Disabled]
2. Limit CPUID Max. to 3 (Note) [Disabled]
3. No Execute Memory Protect (Note) [Disabled]
4. CPU Enhanced Halt (C1E) (Note) [Disabled]
5. CPU Thermal Monitor 2(TM2) (Note) [Disabled]
6. CPU EIST Function (Note) [Disabled]
7. Virtualization Technology (Note) [Disabled]
Robust Graphics Booster [Auto]
CPU Clock Ratio (Note) [7X]
CPU Host Clock Control [Disabled] da bude enable dok ne podesim na 400 posle da ga vratim na disabled pa f10 i Y restart
x CPU Host Frequency (Mhz) 400 da li rucno da ukucam 400 ili....
PCI Express Frequency (Mhz) 100MHz
C.I.A. 2 [Disabled]
Performance Enhance Standard
System Memory Multiplier (SPD) [2.0]
Memory Frequency (Mhz) 667 ??? mislis da to nece da izdrzi?
High Speed DRAM DLL Settings [Option 1]
DRAM Timing Selectable (SPD) [Manual]
***Standard Timing Control***
CAS Latency Time 5 [ 5 ]
DRAM RAS# to CAS# Delay 5 [ 5 ]
DRAM RAS# Precharge 5 [ 5 ]
Precharge Delay (tRAS) 15 [ 15 ]
******** System Voltage Optimized ********
System Voltage Control [Manual]
DDR2 OverVoltage Control 2,1V
PCI-E OverVoltage Control [Normal]
FSB OverVoltage Control 1,4V
(G)MCH OverVoltage Control 1,4V
CPU Voltage Control 1,45V
Normal CPU Vcore 1.38750V
Sta moze da se desi u najgorem slucaju.Nece valjda biti boom hahaha
Ne ozbiljno jer moze da pregori nesto i da se vise nikad ne upali posto ovo prvi put radim
Intel core2duo
[email protected]
GIGABYTE GA-P35-DS3L bios flesovan F9c
4Gb Ram Kingston 667
Nvidia 9800 GT 1GB
ciftech 550w
nemam dodatno hladjenje klasika kako je kupljeno tako stoji nista nije ugradjivano naknadno
da li je potrebno jos nesto da napisem
Hvala na svemu i izvini na oduzetom vremenu.
.
