WinXp i Win98

[pTomic]

E sad, namermo sam napisao WinXP I Win98.
Pre otprilike 2-3 meseca, dok sam bio maskirno zelen, procitam clanak u PC press-u, cini mi se, da se na postojeci WinXP MOZE dodati Win98 i da sve to radi u MultiBoot rezimu. Poenta je bila u tome da se ne koriste neke zezalice tipa VirtualPC, Acronis, ...
Bio bih veoma zahvalan da mi neko prosledi dotican clanak.
Hvala.

 

[I_L_I_J_A]

Alternativno resenje kupis hard za 20e i koristis ga za W98 a koji se bootuje menjas u biosu

 

[voodoo_]

izvini shto pitam, ali zashto bi uopshte stavljao win98 uz xp? koliko ja znam, do sada su uradjeni drajveri za xp za gotovo sve uredjaje, a igre i programi takodje rade...

 

[kjgkreek]

Moguce je da se instaliraju oba os-a ali koliko ja znam samo obrnutim redom tj win 98 pa onda xp na drugu particiju.A za obrnuto sam negde procitao da nemoze sto je i logicno.

 

[zeleni_zub]

Mislim stvarno... Čovek je pitao kako da instalira Win98 posle WinXP-a i dobio odgovore: "kupi još jedan HDD", "a što uopšte hoćeš da instaliraš Win98"... 🙁
---------------------------------------------------------------------------
@pTomic:

Ne znam za taj članak u PC Press-u, i ja sam do novembra bio u vojsci. :mrgreen:

Ali koliko se ja sećam, instaliraš Win98 na drugu particiju. Onda pustiš instalaciju XP-a sa CD-a, pustiš recovery consolu, uloguješ se kao admin i kucaš:
bootcfg /add
onda otkucaš kako hoćeš da se zove ta stavka u Boot meniju i onda otkucaš /fastdetect.

Ovo bi trebalo da radi.

Mislim ako ne radi uvek možeš sa fixboot da vratiš boot XP-a. :mrgreen:

 

[I_L_I_J_A]

Pazi ovako: dodati jos jedan hard je vrlo pragmatican pristup ovom problemu
1) ne kosta puno (i 2gb je dovoljan oko 10e su na oglasima)
2) nema problema jer po mom izkustvu nikada nisam uspeo da pomirim ta dva sistema i uvek je 98 pucala posle par meseci

jednostavno iz biosa promenis koji se prvi bootuje i to je to - vidis konstantno podatke i sa jednog i sa drugog a programa za 98 mozes da instaliras na veci hdd gde je xp (preferabilno u rezlicit dri.

 

[pTomic]

Mislim stvarno... Čovek je pitao kako da instalira Win98 posle WinXP-a i dobio odgovore: "kupi još jedan HDD", "a što uopšte hoćeš da instaliraš Win98"... 🙁
---------------------------------------------------------------------------
@pTomic:

Ne znam za taj članak u PC Press-u, i ja sam do novembra bio u vojsci. :mrgreen:

Sto se tice instalacije Win98 posle WinXP-a, treba mi zbog neke glupe igre za koju sam emotivno vezan. Kad krenem da je instaliram ona prijavi da mi treba W95 il W98. 🙁

A sto se tice Askare, gde si bio ??

 

[zeleni_zub]

...
Sto se tice instalacije Win98 posle WinXP-a, treba mi zbog neke glupe igre za koju sam emotivno vezan. Kad krenem da je instaliram ona prijavi da mi treba W95 il W98. 🙁

A jesi probao da pustiš instalaciju u win95 ili win98 compatiblity modu?

A sto se tice Askare, gde si bio ??

U Rumi.

 

[pTomic]

...
U Rumi.

Pokusavao sam sve zivo, ali nece.
Ostaje mi samo da ubacim W98. Probacu Akronis.

 

[grozda]

moze

Citao sam ranije da je moguce.
Ako se ne varam disk se mora vratiti u FAT32, bekapovati neki fajlovi, instalirati Widows 98 pa se vrate fajlovi za XP. Znam da je nesto tako bilo a ako bas zelis da uradis ima dosta toga na tu temu:

http://www.google.com/search?sourceid=navclient&ie=UTF-8&oe=UTF-8&q=install+windows+98+after+XP

[code:1]Install Win '98 After Win XP is Installed
First:


This procedure assumes that Windows XP is installed on drive C: No support is offered for other drive letters.
Drive C: must be FAT16 or FAT32 to be able to install Windows 98/Me after XP is already installed. The 98/Me installation routine cannot write to an NTFS partition.
If your C: drive is not FAT or FAT32, you CANNOT complete this procedure. You will need a 3rd party boot manager. BootIt Next Generation is a good tool for this.
You must have a second hard disk or partition formatted for FAT16/32 in order to be able to install Windows 98/Me. Installing 98/Me to the same partition as Windows XP is NOT RECOMMENDED!
It's recommended that you use a Windows 98/Me Startup disk for this procedure. If you don't have one, you can download the necessary files from here. You should ensure that DEBUG.EXE is on your Startup disk. If it isn't, it can be copied from the Windows\Command folder. On a 98/Me Startup disk, created from Add/Remove Programs, its in the EBD.CAB file on the Startup disk. For a 98 Startup disk created from FAT32EBD.EXE its on the floppy


Installing Windows 98

1) Use a Win98/Me Startup disk (with CD support) to boot your computer.
2) Insert your Win98/Me CD into the CD Rom drive.
3) At the A: prompt type X:\Win98\Setup.exe (for Win98) or X:\Win9x\Setup.exe (for Win Me) where X: is your CD-ROM drive.
4) Proceed with the install. When prompted for the install location, you'll see C:\Windows.000. Choose Other directory and change this to the drive you wish to install 98/Me to and name the folder Windows (or something else if you prefer).
5) Complete the Win98/Me install. Allow the computer to boot into Win98/Me.


Repairing the Windows XP Boot Loader

1) Create a Win98/Me Startup Disk
2) Create a Notepad file with the following entries, exactly as shown:

L 100 2 0 1
N C:\BOOTSECT.DOS
R BX
0
R CX
200
W
Q


3) Save the file to the Win98/Me Startup Disk as READ.SCR
4) Boot the computer with the Win98/Me Startup Disk and at the A: prompt type

DEBUG <READ.SCR

Steps 1 - 4 create the BOOTSECT.DOS file needed to boot Win98/Me. For your convenience, you can download READ.SCR here. I suggest you use right click and Save As. You may need to use the ATTRIB C:\BOOTSECT.DOS -S -H -R command if BOOTSECT.DOS already exists and you get an error when trying to recreate it.

5) Configure your computer to boot from the CD drive. This is done in the BIOS, or your computer may offer the option at startup if it detects a bootable CD. Consult your computer's manual for more information. If your computer does not support booting from CD-Rom, you should also be able to boot with a 98/Me Startup disk, and run WINNT.EXE from the I386 folder of your XP CD.
6) Insert your XP CD and boot from it.
7) You'll see some files being copied, then you'll be presented with a choice of installing or repairing an existing installation. Choose Repair.
8) You'll be asked which XP installation you want to log into. Enter 1. There is usually only one installation.
9) You'll be prompted for the Administrator password. For Home, the default password is blank, so just hit Enter. For Pro, enter the same password you did during setup for the Administrator account (this is not the same as the password for an Admin level account. It must be the Administrator account password).
10) At the C:\Windows prompt, type FIXBOOT. You'll be prompted to confirm. Do so.
11) When FIXBOOT is finished, remove the XP CD and type EXIT and the machine will reboot.

Reconfigure your computer to boot from the hard drive if necessary.

You will now get the XP Boot loader with your choice of operating systems. [/code:1]





Nesto slicno kao za 2000:
[code:1]
How to install Windows 2000 after XP ?

You have to backup NTLDR and NTDETECT.COM because the Windows 2000 versions will
not boot XP whereas the XP version will boot W2K and XP. They are hidden system
files in the boot drive. Copy them to a blank, formatted floppy, or other
location that will be available after you install W2K.

Install Windows 2000 to a different partition than XP is installed in. You now
have have W2K's NTLDR and NTDETECT.COM.

You need to repair the Windows XP Boot Loader. Boot into Windows 2000, not
Windows XP. Insert the floppy disk that you used earlier (or access the location
you used), to restore the XP NTLDR and NTDETECT.COM. Copy them to the root
directory of your boot drive.

Now, you'll be able to restart your computer and boot into Win 2K or Win XP. [/code:1]

 

[kjgkreek]

E ovako ako oces prvo 98 pa posle da instaliras XP nista lakse, za obrnuti redosled ne znam kako i da li moze.

Ovako podeli HDD na dve particije primarna particija tj C je ona gde ce biti 98 a ona extended je za XP pa po tome odluci velicinu istih.Zatim instaliraj na prvu particiju 98 potpuno normalno, a iz njega pokreni instalaciju XP-a i dobice izbor upgrade ili new( ili tako nesto) i naravno biras to new ili kako vec pise i posle tamo biras da ti instalira da D particiju odnosno drugu, i posle kada ti krene dizanje os-a on te pita da biras koji os zelis.Nikakva mudrost cist sablon ...