Pomoc!!!

[mikicaz]

Imam sledeci problem:
prilikom podizanja sistema(winXP), racunar na samom pocetku daje poruku tipa:"MAC adress on APC and EEPROM is failed!".U daljem tekstu nudi opciju F1 za nastavak i da sledeci put unesem broj MAC adrese. Nakon pritiska funkcijskog tastera F1 sistem se normalno podigne i radi. Ova poruka se javlja pri svakom novom podizanju OS. Interesuje me kako da prevazidjem ovaj problem i da se Windows normalno podize.
P.S. Kasnije sam ustanovio da imam problem u radu mrezne kartice na racunaru(koja mi je jako bitna), pa me interesuje da li je on uslovljen ovom porukom koji dobijam prilikom podizanja OS!

 

[Preoccupation]

Reinstaliraj drajvere za mrežnu kartu. Po mogućstvu najsvežije...

 

[Mister_D]

Ako ti je mrezna integrisana,podesi u biosu njenu mac adresu (sest poslednjih cifara).

 

[MickeyS]

Skinuto sa sajta:

http://www.leadtek.com.tw/eng/support/faq.asp?faqlineid=13&lineid=3

Q: Why does messages "MAC address in APC and EEPROM Failed" and "Press [F2] to continue, [DEL] to enter setup" appear during bootup? And why does my system not work on LAN / WAN after refreshing the system BIOS?
A: Both errors appear because your computer lost the MAC address ID. Enter the "BIOS Setup Utility" menu by pressing "DEL" during bootup. You have to enter the correct MAC address ID in "SIS-900 MAC Address Input" -> "Integrated Peripherals" -> "BIOS Setup Utility" menu. The correct MAC address ID is printed on the label attached to the mainboard. [Warning] Unless you have restarted the computer, do not clear "CMOS" after refreshing the system BIOS. If you clear "CMOS" and do not reboot the system after refreshing the system BIOS, it will result in permanent loss of MAC address ID. It can be recovered from a label on the mainboard.