Kako da otvorim Microsoft Sidewinder?

[anarki1302]

hteo bih da ga otvorim,posto su mi neke dlacice upale...
ne smeta pri radu,ali volim da sve bude cisto...

 

[sikili]

Koliko se secam, skini klizace i ispod njih se nalaze srafovi.

 

[anarki1302]

Koliko se secam, skini klizace i ispod njih se nalaze srafovi.

nikakvih srafova nema ispod klizaca,vec sam proverio

 

[q4u]

Micro$oft made it very easy to take apart the sidewinder mouse. All that is required to take it apart is to take off the back mouse foot, and use the right size star, although some screwdrivers or allen wrenches might work, which is what I used. Once that comes off, you can take the entire top off the mouse. The innards are still beneath that, and to take off the next piece, you unscrew 4 small screws, which doesnt require taking out of the shell, you may leave them in there to avoid losing them. After that, I had access to all the innards.
First, to make the scroll easier, i had some Super Tech lubricant (or any other lubricating oil would work) and put that on either side of the scroll wheel pegs. I also, very slightly, bent back the prongs that provide a clicking resistance for scrolling, enough to where it lightened its grip.
To make the middle click lighter, I bent apart, once again very slightly, the prongs on the other side of the scroll wheel that gave resistance to the clicking.
It was very easy to put the mouse back together, just screwing everything back in the way it was beforehand.
Any type of equipment can be optimized, and people can come here if they find their equipment less than adequate.

ne znam da li ovo pomaže nešto ali za početak probaj.

 

[anarki1302]

Micro$oft made it very easy to take apart the sidewinder mouse. All that is required to take it apart is to take off the back mouse foot, and use the right size star, although some screwdrivers or allen wrenches might work, which is what I used. Once that comes off, you can take the entire top off the mouse. The innards are still beneath that, and to take off the next piece, you unscrew 4 small screws, which doesnt require taking out of the shell, you may leave them in there to avoid losing them. After that, I had access to all the innards.
First, to make the scroll easier, i had some Super Tech lubricant (or any other lubricating oil would work) and put that on either side of the scroll wheel pegs. I also, very slightly, bent back the prongs that provide a clicking resistance for scrolling, enough to where it lightened its grip.
To make the middle click lighter, I bent apart, once again very slightly, the prongs on the other side of the scroll wheel that gave resistance to the clicking.
It was very easy to put the mouse back together, just screwing everything back in the way it was beforehand.
Any type of equipment can be optimized, and people can come here if they find their equipment less than adequate.

ne znam da li ovo pomaže nešto ali za početak probaj.

super,pomaze,video sam taj zvezdasti,ali nisam toliko obratio paznju:wall:

samo je pitanje gde da ga nadjem:d

 

[sikili]

Znaci ako je u pitanju ovaj model Microsoft Sidewinde onda srafovi mora da budu ispod ovih klizaca koji se menjaju bar je tako bilo kod mene.

 

[anarki1302]

Znaci ako je u pitanju ovaj model Microsoft Sidewinde onda srafovi mora da budu ispod ovih klizaca koji se menjaju bar je tako bilo kod mene.

jeste,ispod ima zvezdasti jedan

 

[svarog84]

To je torx 6 velicina, taj standard koristi vecina mobilnih telefona danas...

 

[anarki1302]

To je torx 6 velicina, taj standard koristi vecina mobilnih telefona danas...

hvala

 

[svarog84]

Nema problema, samo proveri jos negde za velicinu za svaki slucaj, znam da je bio torx na originalnom sidewinderu pa sam sada pogledao na mom X8 i tu ide sestica, ne verujem da je drugacije na originalu

 

[anarki1302]

Nema problema, samo proveri jos negde za velicinu za svaki slucaj, znam da je bio torx na originalnom sidewinderu pa sam sada pogledao na mom X8 i tu ide sestica, ne verujem da je drugacije na originalu

ide osmica,i kostala me je 530 kinti,posto nema nigde u j***nom Gornjem Milanovcu kinez...

 

[svarog84]

Izgleda su presli na sestice sada kada prave i mobilne

 

[anarki1302]

Izgleda su presli na sestice sada kada prave i mobilne

sve je moguce...