ja sam imao tu karticu samo msi 6800 le agp i odlicno sam je klokovao ali sam promenio na 1.4v jeste sa grejala ali mogla je da radi na 450 i 900 i otklucao sam je na 16/6 inace ona je defoult 12/5 i 325 700 1.1v
to mozes da uradis sa nvflash-om i butabilnim usb-om kad startujes msdos ukucaj
C:\nvflash
izbacice ti listu opcija i komanda kako to treba da uradis
ali pre toga trebas da otkljucas karticu ako je zakljucana protect on/off zaboravio sam tacno kako ide komanda pisace ti u komandama
kad to uradi spremo je da flashujes bios kartici
evo ti spisak komandi
-- Primary Commands --
Update firmware: nvflash [options] <filename>
Save firmware to file: nvflash [options] --save <filename>
Compare adapter firmware: nvflash [options] --compare <filename>
Update TV data: nvflash [options] --tv <filename>
Display version: nvflash [options] --version [<filename>]
Display firmware bytes: nvflash [options] --display [bytes]
Check for supported EEPROM: nvflash [options] --check
Write protect EEPROM: nvflash [options] --protecton
Remove write protect: nvflash [options] --protectoff
Change soft straps: nvflash [options] --straps=<straps>
Set IEEE 1394 GUID: nvflash [options] --guid=<guid>
Set IEEE 1394 GUID source: nvflash [options] --guidsource=<location>
List adapters: nvflash [options] --list
List PCI firmware blocks: nvflash [options] --pciblocks
-- Commands and Options --
help ? Display this screen.
save b <filename> Read EEPROM and save to <filename>.
compare k <filename> Read EEPROM and compare with <filename>.
tv x <filename> Transfer TV data from file to EEPROM.
version v <filename> Display file version and ~CRC32
(if no filename, acts on display adapter).
display d [bytes] Display 256 the first bytes of the EEPROM
(default is 256 bytes)
check c Check for supported EEPROM.
protecton w Write protect EEPROM (only on some EEPROM's).
protectoff r Remove EEPROM write protect (only on some EEPROM's).
straps m <straps> Change soft straps.
format is: AND Mask 0, OR Mask 0, AND Mask 1, OR Mask 1
guid q <guid> Set the IEEE 1394 GUID in the firmware image
(GUID is in the form of 16 hex digits).
guidsource 1 <location> Set the source of the IEEE 1394 GUID.
main - main EEPROM image
dedicated - separate serial EEPROM part
list a List all NVIDIA display adapters found in the system.
pciblocks List all the PCI ROM Images stored in the EEPROM.
overridetype 5 Allow firmware and adapter PCI device ID mismatch.
overridesub 6 Allow firmware and adapter PCI subsystem ID mismatch.
reboot y Reboot the PC after other tasks completed.
keepstraps g Keep the soft straps already present in the EEPROM
after flashing the new image.
romstrap j Override the ROM strap setting to allow flashing an
image when grounding the STRAP_SUB_VENDOR pin.
This allows flashing a corrupted or erased EEPROM.
Note: Make sure there is a physical EEPROM present
when using this option
index i <index> Force a specific device index.
fwindex F <fw index> Index of which firmware image to use from a firmware
bundle.
auto A When possible, run without user intervention.
directpci n Bypass the PCI BIOS.
silence s Silence all audio beeps.
beep ! Beep to signal updating progress.
nolight l Do not light keyboard LEDs.
override o <level> Override safety check level:
default unknown EEPROM | NV adapter aborts application.
level=1 unknown EEPROM acceptable for read operations.
level=2 unknown NV adapter acceptable for read operations.
level=3 Combined effect of 1,2 (cannot write to unknown EEPROM or adapter).
log L <log file> Create a log file.
pozzdrav i sa srecom ali nemoj da preteras sobzirom da ti se greje mnogo vga
