Šta je novo?
Od:
Filteri

Izbacivanje iz igrica

G

gorac

Cenjen
Učlanjen(a)
15.05.2013
Poruke
38
Poena
154
Pozdrav ljudi...Posle par min me izbaci iz igrice,probao dve i u obe se desava..Prvo je bio error da nema memorije dosta ,a sad izbaci not responding...ili samo vrati na desktop..Update-vao bios i jedan dan je sve bilo ok da bi opet pocelo...Sta bi moglo da bude problem?
Ryzen 5 2600, Ploca ASROCK B450M-Pro4,Ram DDR4 2x 4GB 3200MH Kingston HyperX Fury Black,Gtx 1060 3gb (kopala 7 meseci)ssd samsung 860 evo,i napajanje blueberry PSB 560 jos da napomenem da na ploci ima za napajanje 24+8(na taj od 8 je ukljucen od 4 pina)
Gledao kroz rivu fps oko 60 i memorija ne prelazi 2800mhz temperatura ok i opet me izbaci ili zapuca...
 
Slabo napajanje, menjaj što pre, mada preporuka je i da ne igraš više sa tim napajanjem dok ne kupiš novo.
 
Poslednja izmena:
Ta matična ploča ne podržava tu brzinu od 3200MHz već moraš da je namestiš kao overclock ako se sećam.
Inače, svakako napajanje da se promeni što pre, pod obavezno.
 
Evo i sad me izbaci :) Mada neznam da li sam se natripovao al ko da su se ventilatori utisali na sek i opet jace poceli...Jeste sigurni da je napajanje ?:) Sta preporucujete da nije jako skupo a da je ok?Sto se tice memorije to je u biosu xmp namesteno i uredno prepoznaje 3200mhz ;-)
 
Velika verovatnoća da nije to do napajanja što se dešava jer bi se računar ugasio.

Napajanje je lošeg kvaliteta i jednostavno ne bih želeo da mi računar ovisi o njemu. Nema nikakvu zaštitu a ako se desi neki karambol, može svašta da povuče. :) I napajanje na 12V grani daje samo 16A, a da je pravo 560W trebalo bi da ima makar 30A na 12V grani a za 1060 je navodno minimalno da ima 20A na grani.

Gledaj da ne igraš igre i radiš nešto zahtevno dok ne kupiš neko novo napajanje jer možeš sve da ubiješ.
 
20181231_142347b6f0b060e4b0434f.jpg

Upravo mi se ovo desilo,bio sam na netu par stranica otvoreno...Da probam drugi windows?Koje napajanje preporucujete?
 
Ma koje crno napajanje. Lose ti je napajanje svakako, ali ovo ti nije do napajanja. Moze biti losa RAM memorija, moze biti losa RAM memorija na grafickoj kartici. Moze biti problem sa HDD-om.
Najverovatnije neke nekompatibilnosti relacija Windows - RAM.

Izvoli link sa google-a pa idi redom otvaraj stranice i resavaj jedno po jedno.
https://bit.ly/2RmvinE
 
Vidi sa Whocrashed šta javi, drajver i sl. Igre ne pokreći više.

Koji ti je max budžet za napajanje?
 
Hvala...Pa šta znam,mozda nekih 50-60 e ili ako je nesto ok i ispod toga ili malo gore ako se više isplati(bolje napajanje)
 
whocrashed izbacuje ovo...
System Information (local)
--------------------------------------------------------------------------------

Computer name: DESKTOP-K83224T
Windows version: Windows 10 , 10.0, build: 16299
Windows dir: C:\Windows
Hardware: ASRock, B450M Pro4
CPU: AuthenticAMD AMD Ryzen 5 2600 Six-Core Processor AMD586, level: 23
12 logical processors, active mask: 4095
RAM: 8519454720 bytes (7.9GB)




--------------------------------------------------------------------------------
Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dumps are enabled on your computer.

Crash dump directories:
C:\Windows
C:\Windows\Minidump

On Mon 12/31/2018 2:23:10 PM your computer crashed or a problem was reported
crash dump file: C:\Windows\Minidump\123118-4812-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x180530)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF80372A211D7, 0x0, 0xFFFFFFFFFFFFFFFF)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This might be a case of memory corruption. This may be because of a hardware issue such as faulty RAM, overheating (thermal issue) or because of a buggy driver.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Mon 12/31/2018 2:23:10 PM your computer crashed or a problem was reported
crash dump file: C:\Windows\MEMORY.DMP
This was probably caused by the following module: ntkrnlmp.exe (nt!ExRaiseStatus+0x6C9)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF80372A211D7, 0x0, 0xFFFFFFFFFFFFFFFF)
Error: KMODE_EXCEPTION_NOT_HANDLED
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This might be a case of memory corruption. This may be because of a hardware issue such as faulty RAM, overheating (thermal issue) or because of a buggy driver.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
 
Za 50e SeaSonic M12II EVO. Ja sam rekao da problem nije u napajanju već u memoriji ali da napajanje je veoma loše i ne može da snabdeva njegov računar.

Jel ti RAM 2x4 ili 1x8Gb?
 
ili Seasonic SS-520GB, ili možda FSP HEXA 85+ Bronze HA550, Antec NE550C NeoECO

Proveri memoriju sa Memtest86, ali memorija koristi struju tako da ne zna se dok se ne proba.
 
Poslednja izmena:
Zahvaljujem..Skontao sam da nije problem do napajanja ali da je lose....Ram je 2x4gb...Kad sam sastavio komp u pocetku je kad ga prvi put upalim zakuca na pocetnom ekranu od ploce,onda restart i upali..Pa sam ubacio ram u b slotove i posle toga update-ovao bios i to je ok...da probam da ih vratim u a slotove(al tu mem malo zeza prostor zbog freezer 13 :)?Mene brine graficka jer je kopala pa da nije do nje a nemam gar prodavac izgubio,a rekao da sve ima...mada u furmark-u prolazi sve glat..mozda je i do windowsa jer je ovaj neki aktivirani,prepakovani..da probam clean windows?
 
Da li je jedan do drugog ili si ih odvojio u drugi i četvrti slot? Probaj sa memtest86 vidi šta će da kaže pa izvadi jedan ram i testiraj ih pojedinačno zvuči kao da jedan ne funkcioniše kako treba.

Ne verujem da je do grafičke.
 
Zavrsen memtest sve provereno nema nikakvih gresaka...
 
Moguće da ima problema sa kernelom zato što je neka custom edicija. Instaliraj čist Windows da njihovog sajta, instaliraj ga i aktiviraj putem HWIDGen, pa vidi kako će onda da se ponaša.
 
Posle podne ću srušiti sistem pa da vidimo šta kaže. ..Gde ima SeaSonic za 50 evrica? :)
 
Ja što sam našao najjeftinije 520w 65e..A šta misliš o ovome?
Vampire napajanje za rig, 1000w, napajanje je novo, nije paljeno nijednom, garanciju sam izgubio, zato je ta cena, inace je to naapajanje novo 13000 . Ovo je novo, samo eto nema garancije, izgubljena. Svi potrebni kablovi idu uz njega.50e

Na rasprodaji kvalitetno napajanje marke Tagan 600w.
Ispravno, poseduje 6 pin i 6+2 pin za grafičke karte.30e
Tagan II Force 600w

Ekstra napajanje, nikada popravljano niti otvarano. Korisceno oko 6 meseci.
Napajanje Raidmax Thunder V2 735W
6000din
Na prodaju full modularno napajanje Silverstone Strider + 700w, napajanje je 100% ispravno, full pack, moguca svaka provera, dajem radnu garanciju45e ili ako te ne mrzi baci pogled na kp da je neko iz ns da mogu odmah da preuzmem..Nesto me mrzi od madjara ,neće stići do božića ☺Ili iz emija nešto. ..
 
Ja mislim da ti je do ram memorije, jer i meni je tako kad podesim na 3200mhz, jednostavno nece i izbacuje iz igara, iako win sve normalno radi i u biosu prepoznaje docp profil za 3200mhz, takva je situacija da 3200mhz sa ovom memorijom i plocom kod mene ne mogu da izguram, na 3000mhz radi ok.
Probaj i ti na 2933mhz da podesis memoriju pa ces videti
 
Slikaj GPU-Z, ali opet ne verujem da je do VRAMa i izvrti Passmark kao sto je receno. Al opet, malo mi je cudno "izgubio" garanciju. Pa ja ne znam coveka koji kupuje komponente a gubi garanciju, svi je cuvaju...
 
Prvo napajanje, da ne bi izgorelo nešto sa tim Burningtestom, nije ni očekivati da grafa 1060 radi dobro na napajanju koje ne daje ni 200W po specifikaciji. Ovo nije za zezanje:
tempsnip.png

Bar privremeno kupiti minimum minimuma: LC power lc600h-12-v231 ili možda Gigabyte GP-PB500 za 4000-4500, ali najbolje nešto od gore predloženog
 
Poslednja izmena:
Joj ljudi moji ,ovde izgleda samo cekic pomaze :)Instalirao sam cist windows mada sa torenta i sad malo malo pa kresuje :)Skidam sad sa microsofta pa cu videti sta on kaze...
Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dumps are enabled on your computer.

Crash dump directories:
C:\Windows
C:\Windows\Minidump

On Tue 1/1/2019 4:48:37 PM your computer crashed or a problem was reported
crash dump file: C:\Windows\Minidump\010119-4859-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14CC20)
Bugcheck code: 0x101 (0x10, 0x0, 0xFFFFD0014CD40180, 0x6)
Error: CLOCK_WATCHDOG_TIMEOUT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that an expected clock interrupt on a secondary processor, in a multi-processor system, was not received within the allocated interval. This can be caused by non-responding hardware or by a overheated CPU (thermal issue).
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Tue 1/1/2019 4:48:37 PM your computer crashed or a problem was reported
crash dump file: C:\Windows\MEMORY.DMP
This was probably caused by the following module: ntfs.sys (ntfs+0x1002c)
Bugcheck code: 0x101 (0x10, 0x0, 0xFFFFD0014CD40180, 0x6)
Error: CLOCK_WATCHDOG_TIMEOUT
file path: C:\Windows\system32\drivers\ntfs.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT File System Driver
Bug check description: This indicates that an expected clock interrupt on a secondary processor, in a multi-processor system, was not received within the allocated interval. This can be caused by non-responding hardware or by a overheated CPU (thermal issue).
The crash took place in a file system driver. Since there is no other responsible driver detected, this could be pointing to a malfunctioning drive or corrupted disk. It's suggested that you run CHKDSK.



On Tue 1/1/2019 4:40:37 PM your computer crashed or a problem was reported
crash dump file: C:\Windows\Minidump\010119-3156-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14CC20)
Bugcheck code: 0x101 (0x10, 0x0, 0xFFFFD00044BC0180, 0x7)
Error: CLOCK_WATCHDOG_TIMEOUT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that an expected clock interrupt on a secondary processor, in a multi-processor system, was not received within the allocated interval. This can be caused by non-responding hardware or by a overheated CPU (thermal issue).
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Tue 1/1/2019 4:37:31 PM your computer crashed or a problem was reported
crash dump file: C:\Windows\Minidump\010119-4812-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14CC20)
Bugcheck code: 0x101 (0x10, 0x0, 0xFFFFD0017AAC0180, 0x5)
Error: CLOCK_WATCHDOG_TIMEOUT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that an expected clock interrupt on a secondary processor, in a multi-processor system, was not received within the allocated interval. This can be caused by non-responding hardware or by a overheated CPU (thermal issue).
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
|Skinuo driver za graficku ne prepoznaje graficku,nece da instalira :)
 
Poslednja izmena:
watchdog timeout je uobicajen znak loseg overkloka tj da nije dovoljno visok namesten napon za cpu.ako ti je klokovan sistem vrati na default-e u biosu pa probaj opet,tj za svaki slucaj to uradi.ako nastavi,moze biti svasta i onda kao sto su ti rekli raskaci sve i kreni redom komponentu po komponentu.
 
Kakav overklok pa to napajanje ne moze ni neklokovano da drzi. Vatromet u najavi
 
Morate se prijaviti ili registrovati da odgovorite ovde.
Nazad
Vrh Dno